PDA

View Full Version : GSSE-W Parking lot "swap meet"



rstrucks
01-26-2010, 03:27 PM
If anybody is interested in buying, selling, trading, giving away parts at the event post up what you have or what you are looking for. This will be an informal deal and all parts MUST stay out of the $$$ cabin as we can't afford to risk damage to the rental.

I'll start, I have;
- 5.9 bumper covers and side moldings
- YJ steering box
- WJ brake/knuckle swap parts
- D30 unit bearings
- D30 outer axles
- 17x9 black steel Pro Comp wheels in good shape

I need;
- 2nd gen. GC grill (to be cut up)

I'm sure I'll think of more crap but this should get it started.

EDIT- the grill needs to be a 2nd gen grill - the one that isn't flat accoss the bottom. (Thanks Clay)

ATL ZJ
01-26-2010, 03:59 PM
Cool idea. Ryan is right- it will be very important to keep the cabin clean... more to come on that later.

Here's what I'll have:
random AN fittings, caps, and connectors
20' coil of 3/8" aluminum tubing
brand new exhaust hangers from summit racing
20' of 3/16" 2500psi burst nylon brake line from aircraft spruce
1310 to 1350 conversion ujoint (1)
1330 to 1350 conversion ujoint (2)
ford np205 1310 yokes, ubolt style, 32 spline (2)
possibly 18" 250lb/in springs and 10" long 150lb/in springs for 2.0" coilovers
stock ZJ gas tank (free)
steel winch cable (free)
VDO mechanical temp gauge with adapters, etc

paulkeith
01-26-2010, 04:27 PM
sounds like someone's credit card is holding the security deposit.......:D

Haven't quite piled up my previous stash of ZJ parts,but...

-set of stock bridgestone dueler HTs (practically new) on TSI wheels.
-clear turn signals
-stock airbox

if on the offhand chance someone wants any of that shit, let me know. its just collecting dust.

slim616
01-26-2010, 08:21 PM
also we should post up a wanted or needed list. I have so much random junk laying around it ridiculous.

zj95maxx
01-26-2010, 09:13 PM
Cam bring those conversion joints in case I need to buy them :D

I dont have shit for sale...

a tapped waggy box is about it.

Pearce
01-27-2010, 07:30 PM
I've got a tapped YJ box with tractor supply redneck ram attached.

ATL ZJ
01-27-2010, 08:05 PM
Cam bring those conversion joints in case I need to buy them :D

I dont have shit for sale...

a tapped waggy box is about it.

you run 1350 driveshaft yokes?

zj95maxx
01-28-2010, 10:14 AM
Sheeeeet, I read it wrong.

Nevermind, I will get some baby ujoints myself.

ATL ZJ
02-05-2010, 03:00 PM
I also have this available

http://img.photobucket.com/albums/v125/atlzj/gauge.jpg

It's super nice but I had trouble fitting it to my application. has a bunch of adapters for the probe with it

zjeepin
02-05-2010, 05:24 PM
:gayflag:huh huh... you said probe

Simo
02-10-2010, 09:59 PM
built dana 44 and ford 9"

hydro assist package with tapped xj steering box

yj springs

more details available if someones interested...

rstrucks
02-11-2010, 01:16 AM
built dana 44 and ford 9"

hydro assist package with tapped xj steering box

yj springs

more details available if someones interested...

I assume the hydro assist could be made to fit a ZJ with a front 60? How much do you want for it? You looking for any parts in trade?

Simo
02-11-2010, 06:24 PM
I assume the hydro assist could be made to fit a ZJ with a front 60? How much do you want for it? You looking for any parts in trade?

1.5x8x1” hydraulic cylinder (Surplus Center Item # 9-7258-8, DA HYD CYL SWIVEL EYES). swivel npt fittings, ¼” npt hydraulic hoses 36” long, and spare fittings/hoses. Its connected to a stock saginaw steering box off a cherokee that was rebuilt, drilled, and tapped. The pitman arm was reamed to accept chevy 1ton tre's. $125 as a complete package (box-hoses/fittings-cylinder). It has already served well when attached to a front d60 turning 39.5 iroks. However, the box may not help you because I believe the ZJ box has 4 mounting holes while XJ box only has 3.

jeepman
02-11-2010, 10:41 PM
I have a tail gate for a dodge heavy duty 03-09 white for sale. 200.00
1- full set of 14 bolt ff drum brake drums, shoes and hard ware. All new except drums 100.00 obo
1- 4.56 ring and pinion for 14bolt ff. surface rust, great pattern. 50.00 obo.
1-orbital valve. 20.00 obo
3- stock 17x8 dodge steel wheels. 100.00 obo
Let me know what you want and I will load it up.

zjeepin
02-12-2010, 12:17 PM
trav any idea what the output on the orbital is? i'll take it if its usable..

jeepman
02-12-2010, 07:49 PM
It is only a 5.?displacment. It would be great for toyota or something with a 6'' ram. Call me if you want it. I would do some trading.

zjeepin
02-12-2010, 07:56 PM
ehh don't worry about it. maybe will can use it

rradford9
02-13-2010, 10:29 AM
I'll bring a Warn M6000. If anyone with a lighter rig is interested in it just let me know.

scott
02-13-2010, 08:32 PM
built dana 44 and ford 9"

hydro assist package with tapped xj steering box

yj springs

more details available if someones interested...



what gears, locker, shafts, etc... are in the dana 44

Simo
02-14-2010, 03:41 AM
what gears, locker, shafts, etc... are in the dana 44

Dana 44 High Pinion front axle from 1979 Ford Bronco with radius arm wedges cast into the axle tubes.
4.88 gears with master rebuild kit installed
4340 Warn outer stub shafts and Yukon alloy inner axle shafts
Spicer 760x U-joints, Aussie Locker in 4.56up case, Drive Flanges, 1310 yoke
Knuckles reamed (with 7 degree taper) for over the knuckle steering
Diff guard, trac bar mount modified for 7/8” bolt in double shear
All brakes, bearings, seals, and balljoints replaced new when rebuilt around 2005
Extended Ford style radius arms with adjustable length Rubicon Express Superflex joints.
Was taken out of functional rig in 2008. $900

Project Dana 44 High Pinion front axle from early 1970s F150 (did not have cast RA wedges). Axle is now a clean bare housing with all bracketry, wedges, and inner C’s removed. Axle is ready to be cut down and/or inner Cs to be welded on at desired caster/pinion angle. Top mounted truss built using ¼” plate to form box around differential.Has original 3.55 R&P and 1310 yoke. $200

rradford9
02-15-2010, 05:45 PM
I've also got a 31-spline mini spool for a Ford 9", some 15x8 5on5.5 wagon wheels, and some 8.8 disc brake parts. I don't plan to bring any of this stuff unless someone is interested though...

ATL ZJ
02-17-2010, 04:25 PM
Cool idea. Ryan is right- it will be very important to keep the cabin clean... more to come on that later.

Here's what I'll have:
random AN fittings, caps, and connectors
20' coil of 3/8" aluminum tubing
brand new exhaust hangers from summit racing
20' of 3/16" 2500psi burst nylon brake line from aircraft spruce
1310 to 1350 conversion ujoint (1)
1330 to 1350 conversion ujoint (2)
ford np205 1310 yokes, ubolt style, 32 spline (2)
possibly 18" 250lb/in springs and 10" long 150lb/in springs for 2.0" coilovers
stock ZJ gas tank (free)
steel winch cable (free)
VDO mechanical temp gauge with adapters, etc

Anybody want me to bring any of this?

Also, I NEED one Warn winch solenoid that looks like this if anyone has an extra laying around
http://www.performanceoffroadcenter.com/oscommerce/images/warn%20solonoid.jpg

S-10 Seanzy
02-17-2010, 05:00 PM
I wouldn't mind you bringing the 60 yoke and 1330 to 1350 bastard joints just in case I have a really bad breakage weekend. As of now I don't need them, but I'd appreciate you throwing them in the truck just to be on the safe side.

Anybody want me to bring any of this?

Also, I NEED one Warn winch solenoid that looks like this if anyone has an extra laying around
http://www.performanceoffroadcenter.com/oscommerce/images/warn%20solonoid.jpg

ATL ZJ
02-17-2010, 05:05 PM
I wouldn't mind you bringing the 60 yoke and 1330 to 1350 bastard joints just in case I have a really bad breakage weekend. As of now I don't need them, but I'd appreciate you throwing them in the truck just to be on the safe side.

sold ;)

jeepman
02-18-2010, 06:57 AM
Cam I have a solenoid warn brand I will bring.

ATL ZJ
02-18-2010, 12:21 PM
I wouldn't mind you bringing the 60 yoke and 1330 to 1350 bastard joints just in case I have a really bad breakage weekend. As of now I don't need them, but I'd appreciate you throwing them in the truck just to be on the safe side.

These are loaded up ready to go


Cam I have a solenoid warn brand I will bring.

Awesome, thanks man