PDA

View Full Version : no 4wd lo in my 06 f350



slim616
01-13-2010, 10:35 AM
i have an 06 f350 with the auto hubs 4wd knob. i noticed that last couple of times i used it the truck would not go into 4wd lo but had no issues with 4wd hi. I'm thinking it maybe a wire issue some were or a problem in the switch. Before I began to tear everything apart does anyone have any suggestions.

paulkeith
01-13-2010, 10:39 AM
lay under the truck and watch the linkage motor while someone cycles the knob?

ZoPHaR
01-13-2010, 06:38 PM
Just to make sure you are putting the vehicle in neutral and shifting at a stop right? If your doing that try tapping on the shift motor on the transfer case with a rubber mallet while performing the shift if it goes you need a shift motor.