PDA

View Full Version : FCZJ Intro.



FortCollinsZJ
09-11-2009, 03:25 PM
Hello Mallcrawlers!



I have sold a few things on Mallcrawlin and other forums, and decided it was time I buy a Vendor account.

I will start this off by selling only one product. I will introduce more in the coming weeks. Just to give you some ideas of what I will eventually offer:




Adjustable short arms:
Tube doors
Possibly a roof rack
Sliders
Possibly a front bumper
And anything else I can make that you may want!






For now I will get this first product rolling with free shipping on orders from now until the 20Th of September




ZJ V8 and I6 Steering box braces!

I designed this about a year ago and my brother and I both have one on our ZJ's. The difference id night and day after having put one on, It stiffens up the steering box and gives better control and handling characteristics. The price for these is set at 55.00$ and if you order before the 20th you get free shipping!


Oh, one more thing, the fifth person to order one gets it free.




(I have had one fittment issue with an I6 model that we are currently working out, I need some more folks to try these out, if they don't fit you get a full refund of cost and shipping)

http://i203.photobucket.com/albums/aa231/NEILZJ/ZJ%20steering%20box%20brace/Image019.jpg
http://i203.photobucket.com/albums/aa231/NEILZJ/ZJ%20steering%20box%20brace/Image018.jpg
http://i203.photobucket.com/albums/aa231/NEILZJ/ZJ%20steering%20box%20brace/Image011-3.jpg

FortCollinsZJ
09-11-2009, 11:07 PM
Oh, also I need to get a pair of tube doors gone!

These were built as a proof of concept, and are no longer needed.


I wll do 225 shipped for these. Only one pair available righ now.

http://i203.photobucket.com/albums/aa231/NEILZJ/Tube%20doors/Image010.jpg

http://i203.photobucket.com/albums/aa231/NEILZJ/Tube%20doors/8.jpg

http://i203.photobucket.com/albums/aa231/NEILZJ/Tube%20doors/3.jpg

http://i203.photobucket.com/albums/aa231/NEILZJ/Tube%20doors/6.jpg

ZJones
09-12-2009, 12:30 AM
When is the new design for the tube doors coming out? The weather is starting to cool off here.

FortCollinsZJ
09-12-2009, 01:28 AM
I need to get on them ASAP. I am thinking of making them without latches, but setup for them, then you will be able to order the latches from quadratech for the doors, they will be setup to bolt right in, that way I can advoid being the middle man for the them, definitly going to try and use TJ paddle style this go around.

spykosshow
09-15-2009, 08:25 PM
So long arms...what're you thinking about making? I'm in the market for some for my jeep come december when I'm off from classes.

BigDaveZJ
09-15-2009, 08:57 PM
The posts that need to be seen by people have been seen, cleaning up the thread a bit.

FortCollinsZJ
09-15-2009, 09:08 PM
I REALLY want to produce a rear double tri long arm kit. I will be building another set of LA's for my brothers ZJ in the coming few weeks and will get all the kinks worked out. It WILL be a weld on kit, the crossmembers will be already welded to the unibody stiffeners making it easy to jack the subframe to the jeep framerails, weld it on and install links. Granted you will have to install a rear axle truss, and the lower tabs on the axle must be 22.5* tabs, but all will come with the kit, it will just require a little more in depth installation.

For the front, I still need to come up with something... I am thinking four link, I dont really favor the idea of only one upper. For safety sake.

I have plans for short arms using JJ's and good quality bushings, making them modular, say you decide tp upgrade to LA's you already have the JJ's and the rubber bushings to save money.

FortCollinsZJ
09-18-2009, 02:02 PM
Free shipping for these braces ends Sunday at midnight! Get your orders in if you want one now!

ZJones
11-09-2009, 10:26 PM
It sure would be nice to have some tube doors while the weather is nice. ;)