PDA

View Full Version : ZJ 35"s Long arms Gears lockers Leather



Profender
01-31-2009, 10:35 PM
I think its time to sell my ZJ. Its a 1996 Laredo with Leather and power everything. The only option I dont have is heated seats.

It has a custom long arm lift with 7" Rock Krawler springs. I used 1 1/4" Johnny joints on the frame and and poly bushings on the axle end of the arms. The arms are 2"x2"x.250 square tube. 4 link rear 3 link front.

The rear axle is a Explorer 8.8 with an Aussie and 4.88 gear and a Solid diff cover. The front is a XJ hi-pinion Dana 30 with an aussie and 4.88 gears. Both axles were rebuild before being swapped in. That was about 6000 miles ago. The front has all new ball joints and unit bearings.

It has the 242 Transfer case. Still has the slip yoke. I also have a spare 242 to go with it.

It has a 4.0 auto and only 88,400 miles. It is not from NY state so there is no rust or rot on this Jeep. There is some dents and scratches from the trails.

It has 35" BFG all-terrains on it. I drive it on the road and like the way the ATs handle in the snow and on the highway. They also do very well on the rocks.

I am looking to buy a tow rig with a plow on it. Preferably an Expedition or extended cab truck. Not really looking to trade but I may for the right deal.

Needs to be aligned, front driveshaft should be lengthened, and should have new front shock mounts installed. I have new longer shocks for the front. Also has some gear noise from the rear end.

Asking $5000 for this Jeep. Email me at Ryan@bluedogjeep.com

http://i27.photobucket.com/albums/c182/Ryan_25/10-26-08/PA265252.jpg

http://i27.photobucket.com/albums/c182/Ryan_25/stuff/892dbe0a.jpg

http://i27.photobucket.com/albums/c182/Ryan_25/P7133112.jpg

http://i27.photobucket.com/albums/c182/Ryan_25/f190ccdd.jpg