View Full Version : Banks headers
Brybarzj
08-01-2007, 11:45 PM
Does anyone know of a good site to get them from?
corrupt143
08-02-2007, 12:01 AM
Heres a knock-off. Cheap and well constructed.
http://www.autopn.com/store/pc/viewprd.asp?idProduct=20009
ajmorell
08-02-2007, 08:31 AM
Can't think of any place in particular that is going to be "cheap". I think quadratec had them for about $400. A lot of people say they have had problems with them, but I have been satisfied with mine. One nice thing is that you get a lifetime warranty with it.
DJJordache
08-02-2007, 09:23 AM
Heres a knock-off. Cheap and well constructed.
http://www.autopn.com/store/pc/viewprd.asp?idProduct=20009x2 wish I went that route and saved some $$
Brybarzj
08-02-2007, 10:30 AM
How are they so cheap, does banks offer more power?
DJJordache
08-02-2007, 11:07 AM
How are they so cheap, does banks offer more power?
different steel but other wise look the same. the power difference between these 2 will be next to nothing since they are pretty much the SAME design
ajmorell
08-02-2007, 11:45 AM
You aren't going to get any noticeable difference in power regardless of what header you put on.
ZJ TINS
08-02-2007, 01:49 PM
I have the Autopn version and mid-upper range is definently better especially at altitude, not huge but noticeable and usefull.
Quality seems 1st rate, 1/2" flange and machine welded.
Brybarzj
08-02-2007, 01:56 PM
Ok i think im going to go with the cheap ones. will they make the jeep louder
DJJordache
08-02-2007, 02:08 PM
probably a very small amount vs stock, but thats not the reason to buy a header.....
Brybarzj
08-02-2007, 02:17 PM
I know that
so far - so good... (http://www.the-jersey-devil.com/bbs/showflat.php?Cat=0&Board=Shop&Number=60334&Forum=All_Forums&Words=Autopn&Searchpage=0&Limit=25&Main=60334&Search=true&where=bodysub&Name=&daterange=1&newerval=1&newertype=y&olderval=&oldertype=&bodyprev=#Post60334)
Fish1200
05-17-2008, 02:19 AM
the cheaper steel probally means they will crack sooner. bet the flanges r way thinner too. u get what u pay for
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.