PDA

View Full Version : Parts for sale/trade at GSSE



ATL ZJ
07-17-2007, 12:20 AM
I will bring the following if anybody is interested:
42re transmission
np231 (21 spline input)
th350 trans (have two, both with adapters for range box)
203 range box
ZJ tan leather rear seats
ZJ fuel tank
XJ flywheel

Free or almost free:
stock control arms
gray bumper covers
stock fuel lines and connectors
way more stock stuff, just tell me what you need

SOLITUDE
07-17-2007, 10:40 AM
I'm lookin for a D44al Open carrier if some has one...?

Not bringing, but if someone's interested.
http://www.nagca.com/forum/viewtopic.php?t=28773
Stock Rear trackbar
Stock Rear upper & lower CA's

I'm also selling my box. For $26 if anyone is interested. I've decided to take a different approach and build a new one.
http://www.nagca.com/forum/viewtopic.php?t=30783

SOLITUDE
07-22-2007, 06:45 PM
I also have a factory gas tank skid plate and a factory rear tow hook.

MUDDTRACKS
07-23-2007, 12:59 AM
np231 (21 spline input)
ZJ fuel tank

how much you want chances are i will break my tcase and i sort of need a new tank.

ATL ZJ
07-24-2007, 12:38 AM
how much you want chances are i will break my tcase and i sort of need a new tank.


35 for the tank with questionable (maybe watery) gas in it...

50 for the tcase.. it's a 21 spline but it's already disassembled for ease of swapping pre-96 input assemblies. :D

tell me what to bring

MUDDTRACKS
07-24-2007, 09:05 PM
i will let you know friday waiting on a set of tires to come in and my friend found out today his 241 in the rubi is cracked so we are going to be cutting it close but were coming all else fails i will have my 4 wheelers with me.


ATL ZJ accidental EDIT: sorry not used to these goderator buttons...

ATL ZJ
07-24-2007, 11:23 PM
i will let you know friday waiting on a set of tires to come in and my friend found out today his 241 in the rubi is cracked so we are going to be cutting it close but were coming all else fails i will have my 4 wheelers with me.




You'll be OK. I still haven't driven mine since mid-May... The clutch master is giving me more than a little bit of trouble tonight, but I really need to take this thing around the block and test it out.

MUDDTRACKS
07-26-2007, 11:10 PM
well i got the tires but the trans is fucked up so im going to swap it again.

something went way wrong fast and the trans just stopped engine runs great but nothing in any gear like the pump went out so gong to swap out the trans and t converter fucking stress

ATL ZJ
07-27-2007, 12:39 AM
well i got the tires but the trans is fucked up so im going to swap it again.

something went way wrong fast and the trans just stopped engine runs great but nothing in any gear like the pump went out so gong to swap out the trans and t converter fucking stress

That sounds awful. Is it a 42re or aw4? If it's a 42re, I have an extra.

We are gonna need to drink some serious beer when we get there.. I'm having similar luck with mine. This week is about 45 hours at my job and almost the same on the Jeep trying to get ready :rolleyes:

TrojanMan
07-27-2007, 01:34 AM
Cam i'll take the fuel line if it will work on my 96. Mine is rubber all the way back and gets pinhole leaks sometimes.


Also if anybody has spare 35 shafts.. bring them! I'm welding mine and i'll take them off your hands - you know they're just taking up space in your garage/yard anyway:smt033

MUDDTRACKS
07-27-2007, 07:06 AM
That sounds awful. Is it a 42re or aw4? If it's a 42re, I have an extra. :rolleyes:

so yeah lots of beer is a definet I have a aw-4 a buddy is going to hook me up with one today after work so with any luck i can get it rolling. by tuesday.

JeepinHank
07-27-2007, 09:15 AM
Cam,

Is that 42re the one you posted for sale a while back with a fresh rebuild?

I know mine is on its last days so we might need to talk. I'm looking at a 70% chance of making it up for GSSE right now. I need a definite answer on a trailer with brakes, but I should know for sure after this weekend.

T-man - if I make it, I'll throw in a set of 35 shafts. Are you disk or drum in the rear? (I have both)

I'll also pack a stock steering setup, d30 shafts, front driveshaft, a unit bearing, brake pads and rotor, and some 8.8 shafts. So that will be available if someone needs them.

TrojanMan
07-27-2007, 10:56 AM
disc, probably should have specified that.

JeepinHank
07-27-2007, 02:20 PM
disc, probably should have specified that.

meh, only real difference in the stud length. Even if you got the shorter ones, they'd hold long enough to get you down the road. :flipoff2:


I'll make sure I grab the disc shafts.

ATL ZJ
07-27-2007, 05:47 PM
Hank- Same 42re I posted. Fresh rebuild? Kinda- It's been 4 years since it was done but doesn't have more than 10k on it since then, with religious fluid changes.

Glad you have 8.8 shafts, that is the one spare I don't have..

SOLITUDE
07-27-2007, 07:30 PM
I have some extra 35 drum shafts as well.... I might be needing those D30 shafts you got there. We'll just have to wait and see. I just picked up a full-size spare today at Sam's club, hopefully I won't have to use it and can sell it with the sticker still on it. Gotta get it mounted on one of my old sawblades sometime this week.

I know how you feel.... I was workin 40 hours this week. Probably close to that on the jeep this weekend and next week just getting ready. I need to go stock up on fluids.

ATL ZJ
08-01-2007, 12:56 AM
Did anybody want anything? Loading the truck tomorrow evening..

TrojanMan
08-01-2007, 01:08 AM
Does anybody have any pins for a detroit ez-locker? I have 3 of the 4 I need.

MUDDTRACKS
08-01-2007, 02:57 AM
cam I will take the tank and the tcase we head out in 4 hours

SOLITUDE
08-01-2007, 08:25 AM
Anybody wanna buy a D35.... super cheap? It's taking up space in my garage.

ATL ZJ
08-01-2007, 11:52 PM
Major last minute change of plans. My truck broke so I will be towing with a buddy's land cruiser. Sorry, no tank but I will see what I can do about the tcase.

SOLITUDE
08-02-2007, 02:05 PM
anybody have an extra Receiver Shackle Bracket? Like:
http://www.tellico4x4.com/product_info.php/cPath/51_1996/products_id/433