PDA

View Full Version : "Back-hack" partial ZJ cage



ATL ZJ
06-21-2007, 07:01 PM
This is the unibody reinforcement structure I built in May of 2006 when I cut the rear section of the roof on my ZJ. It is all 1.75" .120 wall DOM and fits very well once the rear roof, hatch, and rear windows are removed. The top of the C pillar hoop will sit level with the roofline, so you could incorporate this into an internal cage, as I did. This welds to the rear quarterpanels, inner wheelwells, C pillar, roof, and the lower half of your D pillar.

It needs a little flap disc action to remove the ends of the other tubes that were attached to it. Also, I already cut the rear seat bar out before I decided to put it up for sale on here but I can weld that back in if you are interested.

I'm asking $100. That's probably less than the price of the tube that's in it- I'm throwing the 10+ hours of labor out the window. I don't think I want to ship this, unless you offer me something significant on top of the freight costs. You can pick it up in Atlanta, GA.

Get it before I cut it up and use the tubing for the next project...

http://img.photobucket.com/albums/v125/atlzj/DSCI0112.jpg
http://img.photobucket.com/albums/v125/atlzj/DSCI0110.jpg
http://img.photobucket.com/albums/v125/atlzj/DSCI0110-1.jpg