PDA

View Full Version : 99+ Intake Manifold and 3'' Dynomax Welded Muffler



KeepItCrunk
05-20-2007, 02:27 PM
Just wut the title says.

99+ 4.0 intake manifold, no cracks, 1 of the fuel rail bolts was snapped before i got it, I would take it out but i have no use as i already have one installed on my 4.0. $60.00

3'' center inlet and 3'' offset outlet. Used for less then 2k mi. on a 4.5L street jeep stroker. Its the welded one. perfect condition, can't even tell it was used other then a slight ammount of carbon on the inside. $50.00


- Feeler -

LP D30 w/ 3.73's front. Fully disassembled down to the axle itself. Was going to do knuckles and swap in my 297 shafts. CA mounts are all reinforced and welded inside and out. cleaned and painted black. $350.00

AL44 w/ 3.73's with calipers track-bar and discs, will need new discs. All CA mounts have been reinforced and welded inside and out as well. Cleaned and painted black. $450.00

Im located in central mass. 978-855-3141 is my cell. Im at a friends and have no comptuer at my new appartment so if your very interested call my on it. if not it may take me a few days to reply to your post.

Thanks!!