PDA

View Full Version : 94 ZJ Stroker DD



skrracing
04-12-2007, 01:15 PM
Have been working on it for some time and keep making changes all the time. The new Stroker was the newest mod and man it has some real grunt now. running a 231, long arm kit, ARB front and rear locker with a Ford 8.8 and 456 gears. I do drive it every day as a work rig and it sees a lot of trail miles as well. I will add some of the other mods later but just wanted to start my members rig. Later...Clint

http://www.lostzj.com/photos/toj1.jpg

http://www.lostzj.com/photos/stroker1.jpg

http://www.lostzj.com/photos/moab18.jpg

http://www.lostzj.com/photos/moab068.jpg

http://www.lostzj.com/photos/trailer6.jpg

Cue-Ball
04-12-2007, 01:41 PM
Looking good, you need to give us some info on your fender flares.

sailbrooks
04-12-2007, 02:27 PM
I am pretty sure those are liberty flares.... I thought about those but they were not wide enough for my fullwidths and 3.75" BS wheels (I am about 80" wide overall.)

skrracing
04-12-2007, 02:47 PM
You hit the nail right on the nose there Sailbrooks... They are KJ flairs. I found a set on ebay. The front were very easy to do. I even used the factory clips to mount them. Matter of fact the KJ flairs even have an intendation were the ZJ cladding is so it made for an easy install. The rear were a lot of work. I had to do some cutting to make them fit and the mounting was not as easy as the front. I then used under coating to get them all the same color as the cladding because it was under coated as well. This is an old picture when I first installed them and have trimmed them after that. I will get a few more pictures in the next couple of days and post them up. Later...Clint

http://www.lostzj.com/photos/jzfender.jpg

skrracing
04-12-2007, 03:01 PM
Vehicle Make
Jeep
Vehicle Model 1994 Grand Cherokee
Engine
4.6 Golen Stroker, Banks Headers, Ford 24 lb Injectors,

RE 62mm TB, K&N FIPK, Jett Chip stage II

Flowmaster muffler, MSD Coil

Transmission Auto
Transfer case 231 Command Trac with SYE
Front Axle ARB Locker, 4.56 gears, Disc Brakes HP 30
Rear Axle ARB Locker, 4.56 gears, Disc Brakes, Ford 8.8
Front Suspension RE 4.5 Long Arm with Budget Booster spacers for about 6" lift
Steering Currie Heavy Duty Tie Rod System
Rear Suspension RE 4.5 Long Arm
Wheels American Racing Outlaw II 15"
Tires MT/R
Other Mods Hanson Front Bumper with SuperWinch 9000
Kevin's Off Road steering brace,

All J Products custom

Custom KJ Fender Flairs

Yaesu 8800 ham radio. Cobra CB. Yaesu VX7R handheld

Lowrance Baja 480C GPS System

Custom Rear Cargo Area Rack with all kinds mounts

Raingler Rear Cargo Area Cargo Net

Sirius Radio

Pro-Comp 8" Off-Road Lights

Cue-Ball
04-12-2007, 03:41 PM
Be sure to get some pix of the rear cargo area also. One of these days I want to build something trick back there.

canadian_driver
04-13-2007, 12:21 PM
looks good.... more pictures

ILikeMud
04-13-2007, 01:14 PM
Very nice.

I like it.

adam99wj
04-13-2007, 11:03 PM
looks sharp

skrracing
04-14-2007, 03:07 PM
Here are a few more shots of the GPS, ham radio mount... Rear cargo area box and net, and the fenders. On the fenders..I cut a lot of sheet metal in the front but very little in the rear. The front KJ fenders have a great setback right where the ZJ side cladding is so it makes for a great fender to use. I picked them up from ebay. They were different colors but I used black rubber under coating to match the cladding which I had under coated in the past. By the way...I love the front Hanson bumper but I am going to trim the ends to make them a little shorter seeing that I do not have the stock sheet left after trimming for the fenders. Later...Clint

http://www.lostzj.com/photos/cargo.jpg

http://www.lostzj.com/photos/gps.jpg

http://www.lostzj.com/photos/frontfender.jpg

http://www.lostzj.com/photos/frontfender2.jpg

http://www.lostzj.com/photos/rearfender.jpg

http://www.lostzj.com/photos/rearfender2.jpg