PDA

View Full Version : Shaved, narrowed D60



Crunch
04-08-2007, 12:34 AM
I've got a D60 semi-float that is shaved to the same clearance as my D30, narrowed to 61" WMS to WMS, 35 spline Moser alloy shafts, TSM disc brakes w/11"rotors, 4.88 Dana Spicers and a Rieder Racing full spool. The bottom is a 16mm plate and is flat so that it slides over rocks. It has been on one trail run and about 500 road miles. Thats the good. The bad? Its is set up for an XJ, so the MORE "anti wrap" perches would need to be lopped off in favor of your link brackets. If you have a ton of $$$ in your 30, no problem as this axle is 5x4.5, and the rotors are drilled for both that and 5x5.5 so re-drilling the shafts is no big deal when you go bigger up front. The axle when originally built had an ARB so it has a plug in the housing and a hole in the cap if that is what you want. I'd like to get $1700 but am open to offers. http://i11.photobucket.com/albums/a151/Crunch406/New%20Mods/DSCF1995.jpg
http://i11.photobucket.com/albums/a151/Crunch406/New%20Mods/DSCF0571.jpg