PDA

View Full Version : '94 ZJ NP231 w/ AA SYE



Timzjatl
03-15-2007, 08:00 PM
NP231 from 1994 4.0L ZJ
Rebuilt 40K ago w/ new chain, bearings, etc
Has AA SYE installed (This is a full SYE that replaces the rear output shaft, not just a hack N tap)
Will also throw in a Double Cardian Tom Woods Driveshaft that was made for my truck when the SYE was installed. The boot over the spline is ripped, but the splines are in great shape.

$450 obo, for the above (Tcase, SYE, Driveshaft)

e-mail me direct if interested c1tim <at> yahoo.com
I don't visit this site much anymore.

EDIT:
Pics attached. There is no endplay in the input or output shafts and everything turns freely. http://bp3.blogger.com/_4_yKuuUJ20s/Rgk5-njCbZI/AAAAAAAAAD0/rxe2RsGQk_M/s320/Tcase+and+Shaft.JPG
The Driveshaft needs a new boot over the slipm spline and the u-joint at the Axle end should be replaced.

Here's the input shaft length, approx 7/8"
http://bp2.blogger.com/_4_yKuuUJ20s/Rgk6TXjCbaI/AAAAAAAAAD8/BOuZ-liKXUc/s320/Tcase+Input+shaft.JPG

Price reduced to $400 Obo

Tcase is located in Greenville, SC prefer not to ship, but will on your dime.