adam99wj
01-31-2007, 12:35 AM
here is where it all started
i got the rig and put a bb and a set or 245/75/16 tires on it
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/P2060008.jpg
then went to the 6.5" RK long arm kit , it drove very well compared to stock at first cause all the stock CA bushings were really wore out . but after a few months the joints in the links really started making some noice, but everyone already knows about RK crud
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/jeep1.jpg
then a custom tube winch bumper me and a buddy put together in a wknd
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/wjbumper2.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/wjbumper4.jpg
i finally got my tires and rims after about 2 months,
35x12.50x15 interco trxus, and 15x8 crager soft 8s
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0013-1.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0014-1.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0015.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0133.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0109.jpg
added an ABS pipe snorkel
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0309.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0318.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0326.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0323.jpg
fabbed up a rear bumper after i beat the crap out of the stock plastic cover
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/DSCN1855.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/DSCN1856.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/DSCN1857.jpg
i finally got around to doing my axle swap , i used a hp dana 44 and a ford 9" full width from a 78 f-150, with 1 ton chevy TRE's and DOM , dont have any good pics , these are the perfect width for a wj with over a 35" tire IMO
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0075.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0074.jpg
and here are the current pics , i was going to use some TJ flares but i decided to chop the front and rear fender wells instead
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0147.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0120.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/101_0068.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0067.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0068.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0070.jpg
on the do to list
4.88 gears and detroit locker in the rear
4.88 gears and full spool in the front
37x13.50x15 pitbull rockers or interco iroks
some skids and box rockers
let me know what you think
i got the rig and put a bb and a set or 245/75/16 tires on it
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/P2060008.jpg
then went to the 6.5" RK long arm kit , it drove very well compared to stock at first cause all the stock CA bushings were really wore out . but after a few months the joints in the links really started making some noice, but everyone already knows about RK crud
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/jeep1.jpg
then a custom tube winch bumper me and a buddy put together in a wknd
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/wjbumper2.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/wjbumper4.jpg
i finally got my tires and rims after about 2 months,
35x12.50x15 interco trxus, and 15x8 crager soft 8s
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0013-1.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0014-1.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0015.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0133.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0109.jpg
added an ABS pipe snorkel
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0309.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0318.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0326.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0323.jpg
fabbed up a rear bumper after i beat the crap out of the stock plastic cover
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/DSCN1855.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/DSCN1856.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/DSCN1857.jpg
i finally got around to doing my axle swap , i used a hp dana 44 and a ford 9" full width from a 78 f-150, with 1 ton chevy TRE's and DOM , dont have any good pics , these are the perfect width for a wj with over a 35" tire IMO
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0075.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0074.jpg
and here are the current pics , i was going to use some TJ flares but i decided to chop the front and rear fender wells instead
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0147.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/CIMG0120.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/101_0068.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0067.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0068.jpg
http://i8.photobucket.com/albums/a33/adam1000s/my%20jeep/IMG_0070.jpg
on the do to list
4.88 gears and detroit locker in the rear
4.88 gears and full spool in the front
37x13.50x15 pitbull rockers or interco iroks
some skids and box rockers
let me know what you think