PDA

View Full Version : TW Shaft, Corbeau Suspension Seats, Calipers, Steering Box, etc



OverkillZJ
12-26-2006, 06:14 PM
OK, time to clean out the garage, and that means sell stuff.

ALL PRICES ARE LOCAL PICKUP, CONTACT ME IF YOU WANT TO DISCUSS SHIPPING. I’m located in South Fayette barely south of Bridgeville PA: 15017. PM for details.

First up: a Corbeau reclining seat. It was a display unit at 4WDH, never installed since then. No hardware included but the seat itself. Like new, $175

http://www.fccsonline.com/forsale/seat1.jpg

Next up: Corbeau Baja suspension seats. Never installed, was planning on using in buggy but prefer a 2-seater. Asking $300 for the pair and would prefer not to separate.

http://www.fccsonline.com/forsale/suspseat.jpg


Also selling a new (reman) steering box. I bought this trading in my old box last year before the rig was buggied, should be like new and no core fee needed. Out of a 1997 ZJ, should work in just about any rig that used these boxes (TJ/XJ/ZJ/YJ etc). $175 for local pickup.

http://www.fccsonline.com/forsale/steeringbox.jpg


Also selling two 35 spline shafts from a Ford F350 HP60 front. Was replaced with aftermarket shafts: these are 35 spline inner, 30 spline outers. Probably need new ujoints. $75 per side local pickup

http://www.fccsonline.com/forsale/60shafts.jpg

Never used spare pitman rod-end from the Currie HD steering setup. This was never used and bought as a spare, $40 local pick up

http://www.fccsonline.com/forsale/pend.jpg
http://www.fccsonline.com/forsale/pend2.jpg


Ujoint style Dana30 (HP or LP) ubolt style yoke with ubolts: $25 local pickup

http://www.fccsonline.com/forsale/30yoke.jpg


Relatively new D30 front calipers from 97ZJ: There are remans that were only on the road for one year, probably about 8,000 miles on them. Asking $35 / side with the pads.

http://www.fccsonline.com/forsale/frontcalipers.jpg



Stock 60 cover from 1978 F35 HP60 front axle; $10

http://www.fccsonline.com/forsale/60cover.jpg


High Pinion 30 housing with knuckles: no shafts / hubs, just the housing w/ knuckles: $40 local pickup

http://fccsonline.com/forsale/HP30.jpg

2jeepsforus
12-26-2006, 10:29 PM
You have PM...

Thanks,
Dave

OverkillZJ
12-26-2006, 10:44 PM
There's 3 in line for the "ugly bug functional" 30 cover, I'd assume it sold if you're not one of the 3 in line!

canadian_driver
12-28-2006, 01:00 AM
damn i want thoes seats, but its inbetween that and a neew steering setup

OverkillZJ
12-28-2006, 12:29 PM
You know you want the seats! I'll box them for free (have lots of boxes and can fit them into one custom box) so shipping them shouldn't be too bad, they're pretty lite weight.

And since somone asked: No, the seats were not $159 each retail, the cloth/vinyl combo retails at $199 each.

OverkillZJ
12-28-2006, 12:29 PM
SALE PENDING ON THE "UGLY BUT FUNCTIONAL DIFF GAURD"

OverkillZJ
12-28-2006, 12:31 PM
Fairlead is SOLD

TrojanMan
12-28-2006, 04:55 PM
hmm, more stuff I can buy and pick up 3 years later

RiPPiNiTuP7
12-30-2006, 07:22 PM
pm'ed you.

OverkillZJ
01-08-2007, 02:28 PM
Driveshaft, diff cover, fairlead are all sold; rest is still up for grabs.

zj-monster
02-20-2007, 05:49 PM
First up: a Corbeau reclining seat. It was a display unit at 4WDH, never installed since then. No hardware included but the seat itself. Like new, $175

http://www.fccsonline.com/forsale/seat1.jpg



Like new my big ugly foot...put a vacuum to that bad boy and I'll take it. :flipoff2:

How much to 28307?

OverkillZJ
02-20-2007, 05:51 PM
Sorry man, everything is SOLD except for the 30 calipers, and the stock 60 cover.

I'm out of seats, but I'll be doing another big for-sale once the snow clears from around my shed

zj-monster
02-20-2007, 06:11 PM
Sorry man, everything is SOLD.

I'll be doing another big for-sale once the snow clears

http://www.maniacworld.com/stop-crying.jpg







Hmmm...snow. Here in Africa it's damn near 80 and sunny every day. :smt114

bnboffroad
03-10-2007, 11:08 AM
i like ur buggy man thats nice