PDA

View Full Version : New Laser Cut Brackets. TONS!!! CHEEP!



Kraqa
12-20-2006, 01:25 AM
http://img.photobucket.com/albums/v280/Kraqa/Parts%20to%20sell/DSCN0572.jpg
Gusset Material:
http://img.photobucket.com/albums/v280/Kraqa/Parts%20to%20sell/gusset.jpg
Recomended for:
-Roll Cage
-Suspension Link Mounts
-Frame
Width: 3" (Can be cut down to 2-5/8")
Length: 46"
Through Hole: 1-1/2", 2"
Material: 1/4" Mild Steel
Quantity: 8
Price: $45.00 Each
Suspension Link Brakets (Large):
http://img.photobucket.com/albums/v280/Kraqa/Parts%20to%20sell/Largesuspension.jpg
Recomended for:
-Rubicon Express Large Flex Joint
-Any Heim Joint
-Poly Urethane Bushings
-Currie 2" and 2-1/2" Johny Joint
Tubing Diameter: 3" - 3-1/2" Tube
Through Hole: 7/16" hole
Material: 3/8" Mild Steel
Distance from mounting surface to bolt hole: 1-7/16"
Quantity: 35
Price: $5.00 Each
Suspension Link Brakets (Small):
http://img.photobucket.com/albums/v280/Kraqa/Parts%20to%20sell/SmallSuspension.jpg
Recomended for:
-Up to 1" Heim Joint
-Poly Urethane Bushings
Tubing Diameter: 3" - 3-1/2" Tube
Through Hole: 7/16" hole
Material: 3/8" Mild Steel
Distance from mounting surface to bolt hole: 1-1/8"
Quantity: 35
Price: $4.50 Each
Shock Brakets:
http://img.photobucket.com/albums/v280/Kraqa/Parts%20to%20sell/3x0.jpg
Tubing Diameter: 3" - 3-1/2" Tube
Through Hole: 1/2" hole
Material: 3/16" Mild Steel
Distance from mounting surface to bolt hole: 1-7/8"
Quantity: 18
Price: $4.00 Each
Shock / Coil Over / Air Shock Brakets"
http://img.photobucket.com/albums/v280/Kraqa/Parts%20to%20sell/1.jpg
Tubing Diameter: 1-1/2" - 2" Tube / 1-1/2" SCH40 Pipe
Through Hole: 1/2" hole
Material: 3/16" Mild Steel
Distance from mounting surface to bolt hole: 1-1/8"
Quantity: 21
Price: $3.50 Each
Misc Tube Brakets
http://img.photobucket.com/albums/v280/Kraqa/Parts%20to%20sell/1-1.jpg
Common Uses: Light Mounts, Break line brakets, Buggy Skins, Any Small equipment mounting.
Tubing Diameter: 1-1/2" - 2" Tube / 1-1/2" SCH40 Pipe
Through Hole: 3/8" hole
Material: 3/16" Mild Steel
Distance from mounting surface to bolt hole: 1"
(Please note, the ends can be ground down very quickly to be mounted to a flat surface for light mounts.
Quantity: 29
Price: $2.50 Each

chadjans
12-26-2006, 06:27 PM
Can you make any of those fish plates out of 1/8". Need to reinforce the frame rails forward of the driver compartment.