PDA

View Full Version : Well here's my ZJ



Tim93ZJ
11-23-2006, 11:29 PM
Well it has a custom long arm lift 9" , an 8.8 rear lockers front and rear with 4:56 gears 231 t-case, Tera hy steer set. And ect, ect,
The pic is from an area by here called dogtown. The pic doesn't do it justice for how steep the hill is.

http://i6.photobucket.com/albums/y250/Tim93ZJ/dogtown11.jpg

ILikeMud
11-23-2006, 11:45 PM
9" lift? a lil high don't you think.
What size of tires?

Looks alright.
EDIT: Eat shit, welcome to MC!

NAFTEL
11-24-2006, 11:03 AM
yeah what size rubber you clearing with that much lift?

Tim93ZJ
11-24-2006, 12:47 PM
The tires are Dayton Timber Line M/T they are 33-12.5-15. But when I put them up to the MTR's and Swampers they are the same size as their 35" tires. I'm moving up to 37's as soon as the tires wear out.
It mainly is set up for travel.
Here a pic on some of suspension set up.

http://i6.photobucket.com/albums/y250/Tim93ZJ/DSC01242.jpg

NAFTEL
11-24-2006, 04:46 PM
ok well eat shit and welcome to mallcrawlin!

Skyline
11-24-2006, 10:11 PM
Nice ZJ. Is it drivable on the highway?

redzj
11-24-2006, 10:29 PM
Interesting subframe setup. Nice to see something different. but 9" with 33's :gayflag:

Tim93ZJ
11-24-2006, 11:01 PM
Yes it's drivable on the hwy. I take it Nevada alot for runs up there. It will handel with no problems at 70+ mph. Most of the trails around here takes around an hour to get too, that is to the good ones.
As for the tires like I said before if you put them up next to a 35" they are only about 1/4 to 1/2" shorter. Also I am just waiting for them to wear out so I can go up to 37's.

2jeepsforus
11-25-2006, 12:32 AM
http://i6.photobucket.com/albums/y250/Tim93ZJ/DSC01242.jpg

Whats the flex hose for? Is that the way you ran a duel exhaust setup?

Anyway I also agree its nice to see a different long arm setup, anymore pics?

Dave

Tim93ZJ
11-25-2006, 12:16 PM
What you see is the factory wire harness.

Tim93ZJ
11-25-2006, 12:31 PM
Here's one from the Deer Valley trail..

http://i6.photobucket.com/albums/y250/Tim93ZJ/deercreek004.jpg

O'Tool
11-25-2006, 03:38 PM
I want the blueprints for that tube support and subframe!