View Full Version : 4.7 stroker (Motivated seller)
servouxh
11-22-2006, 06:22 PM
So, I have an assembled 4.7L stroker that I want gone. The kit is from Accurate Power. I know they are not in business any more so I don't know how that effects the resale of one of their kits. But it has bushed rods, 9.6:1 pistons 0.060" over bore. Crane cam for low end torque (I'll get the exact specs if I have to). It also has a big valve head and a flow kooler H2O pump. The engine was blasted, bored, honed and the machine shop installed the cam and cam bearings. All the rest of the work was done by a friend of mine who works at the machine shop. But its been sitting around for over a year now so it will need a freshinging, so to speak. It will need to be cleaned. And everything checked out before it is run. Pending their sale I also have a loaded 99+ intake manifold with a 62mm TB and 24lb injectors, a set of Mike Leach headers,a Taurus E-fan and a high output ignition kit (coil, wires, plugs...). For the whole thing I'd like to get $1500 but I'm not shipping this pig. I'm located in the Syracuse area of NY and am willing to drive a ways to deliver or meet 1/2 way or what ever for the cost of gas. Just the engine I'd like to get $1200. PM or post doesn't matter, I check back fairly often. For the record I think I have about $5000 to $6000 invested in this thing. I also have a performance built 42re trans with a TQ converter matched to the cam.
Intake, T-body and injectors are no longer available.
http://i43.photobucket.com/albums/e368/servouxh/th_PICT0012.jpg (http://i43.photobucket.com/albums/e368/servouxh/PICT0012.jpg)
http://i43.photobucket.com/albums/e368/servouxh/th_PICT0010.jpg (http://i43.photobucket.com/albums/e368/servouxh/PICT0010.jpg)
http://i43.photobucket.com/albums/e368/servouxh/th_PICT0009.jpg (http://i43.photobucket.com/albums/e368/servouxh/PICT0009.jpg)
http://i43.photobucket.com/albums/e368/servouxh/th_PICT0008.jpg (http://i43.photobucket.com/albums/e368/servouxh/PICT0008.jpg)
Cue-Ball
11-22-2006, 07:07 PM
I thought the accurate power kit was a 4.6??
That is a great deal for $1500 I spent more than that on mine and it did not have a Hesco pump, nor the header or the intake.
Good luck.
I thought the accurate power kit was a 4.6??
That is a great deal for $1500 I spent more than that on mine and it did not have a Hesco pump, nor the header or the intake.
Good luck.
Dirk, I believe the 4.6 results from a .030" overbore and a 4.7 is a .060". At least that's what my research has shown as I'm looking to build one for my wife's XJ in a year or so.
Sweet deal on this one though, good luck with the sale servouxk
Cue-Ball
11-23-2006, 03:39 AM
Yea I think you are right Dave,
Sometimes I kick myself for buying the stroker I did, I could have probably saved money just buying one built from Golen or something, atleast then I would know what my actual specs are!!!!
Oh well story of my freakin' Jeep life.
Dirk
servouxh
11-28-2006, 08:09 PM
OK, how about $1000, for the engine, bigvalve head, leach headers, taurus E-fan, T-stat controller for the fan, high power ignition system, carsound cat and and flowmaster 50. The muffler needs a new pipe welded to the outlet (or inlet I cant remember). If you are wondering, the crank is the 4 counter weight version.
This has to be worth the drive for someone. I have a chain fall in my barn so I can load it up real easy.
If you didn't live halfway across the US from me, I would be seriously considering.
If you didn't live halfway across the US from me, I would be seriously considering.
X2
Good luck with the sell!
SirFuego
11-29-2006, 02:42 PM
servouxh,
I am assuming "CNY" means Central New York? I went ahead and posted a link to this on WNYOffroad (Buffalo area group) to try to help you out. I know there are a couple of members that were looking into stroking their I6, so I was thinking there may be some interest.
servouxh
11-29-2006, 08:48 PM
thanks SirFuego, it is much appreciated.
servouxh
12-07-2006, 06:50 PM
Seriously nobody wants this thing. I'll deliver up to 1.5 hours away for FREE!!!
Captain Crash
01-17-2007, 01:29 PM
Sent you a PM.
Captain Crash
01-29-2007, 02:46 PM
Haven't heard back from you... I'm really interested in this, please tell me it's still available :smt003
O'Tool
02-21-2007, 07:40 PM
I am also interested.
Is this thread "Dead and Gone" like the Jeep?
Lemme know! I'm in Buffalo and am looking for an engine!
Aaron
ZJARCHER
02-22-2007, 06:29 PM
Hey man... post this in the JU speed freaks forum... someone will jump on it there!
death-mobile
03-06-2007, 08:31 PM
How much for the trans? I'll come pick it up if the price is right.
ELLLLLIOTTTTT
01-09-2015, 03:49 PM
Still available?
dp96zj
01-09-2015, 06:01 PM
He gave it to maxxX actually. Traded it for a date with his sister.
ELLLLLIOTTTTT
01-11-2015, 05:37 PM
He gave it to maxxX actually. Traded it for a date with his sister.
Maxx is a youtube celeb now.
BigClay
01-12-2015, 01:16 PM
Maxx is a youtube celeb now.
Links?? :D
Kraqa
01-12-2015, 11:47 PM
hes all over my instagram with his "in tha gym" pics.
he's on my xbox live friends list but i never see him online anymore.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.